Before adjustment 37 (GB)
Before adjustment
Notes on batteries
• If the projector does not operate properly, the batteries might be worn out.
Replace all three of them with new ones.
• The life of the batteries depends on frequency of usage and how often you use
the LIGHT button. If they are worn out quickly, replace them with new alkaline
batteries.
• To avoid damage from possible battery leakage, remove the batteries when the
remote control will not be used for a long time.
Connecting the remote control to the projector
Note
When you connect the remote control to the projector as mentioned above, the
remote control detector of the projector does not function. For wireless operation,
be sure to disconnect both plugs from the projector and the remote control.
Rear of the projector
CONTROL S OUT
Remote control cable (supplied)
CONTROL S IN
PLUG IN POWER
CONTROL S
IN OUT
To Next Page
Loading...
