Select Include only the following IPs in this profile
1. In the IP Addresses or IP ranges text box, enter an address or range, and click Add.
The new entry is displayed in the list below.
To remove an address or range from the list, select the check box next to the entry you
want to remove, and click Delete.
To search for an address or range in the list, enter a search term in the text box below the
list, and click Filter.
To delete a search term from the text box, click Clear.
■
Devices
Select Include all devices in this profile
or
Select Include only the following devices in this profile
— In the Devices list, select the types of devices that you want to include. If the device
type does not match any of the categories in the list, select Unknown.
■
Client Applications
Select Include all client applications in this profile
or
Select Include only the selected applications in this profile
1. In the Client Applications list, select the client application(s) that you want to include.
2. If the client application you wish to add is not listed, enter it in the Application name
text box. Enter the product’ s User agent string (The appliance performs prefix matching
for this field. If you enter a prefix of the user agent string, all user agents that start with
the same characters will match). Click Add.
4. When you have finished defining the profile, click Apply.The profile is displayed in the list of
Connection Profiles. Once it is referenced in an authentication profile, the In use status
changes to Yes. For more information, see “Authentication.”
Related concepts
Example: Configuring Connection and Authentication Profiles on page 137
About Authentication on page 132
Authentication on page 131
Related tasks
Configuring an Authentication Profile on page 135
140 | Configuration | Sophos Web Appliance
To Next Page
Loading...
Need help?
General
