Sophos WS100 User Manual

Basic Deployment Options
Three basic network deployments are possible for the Sophos Web Appliance:
■
Explicit Deployment: All client web browsers are explicitly configured to use the appliance,
although this can be done centrally by using distributed Active Directory Group Policy Objects
(GPO). Explicit Deployment also supports FTP over HTTP.
■
Transparent Deployment:The firewall or router is configured to redirect port 80 and port 443
traffic through the Web Appliance. In this mode, web traffic filtering is transparent to users,
who only see evidence of the Web Appliance if they attempt to connect to certain URLs and
are presented with a notification page.
■
Bridged Deployment: All outbound network traffic is routed through the Web Appliance’s
bridge card, but only port 80 and port 443 traffic is examined.This deployment requires the
optional bridge card included with some appliance models.With a Bridged Deployment, network
traffic continues to flow in the event of an appliance failure.
Alternative Deployment Options
There are three additional deployments that allow the Web Appliance to work with some common
network topologies.You may want to use one of the following, depending on the structure of your
existing network.
■
Bypass for Internal Servers: Allows clients to access specific internal servers directly. This
is recommended for use with Explicit Deployment.
■
Use with an Existing Cache: Allows the Web Appliance to work in conjunction with a
pre-existing investment in a web-caching server in any one of the three basic network
deployments (Explicit, Transparent, or Bridged).
■
Use with an ISA/TMG Server: Allows the Web Appliance to work with a downstream or
upstream Microsoft Internet Security and Acceleration (ISA) or Microsoft Forefront Threat
Management Gateway (TMG) Server in any one of the three basic network deployments
(Explicit, Transparent, or Bridged).
Network Deployment Recommendations
It may be necessary to make additional adjustments to accommodate the requirements of your
network.
Important: If Active Directory integration is not enabled, the Web Appliance allows connections
from any user or computer that can access it.This means that it could allow people from outside
of your organization to use your Web Appliance as a proxy, consuming your bandwidth and
creating traffic that appears to come from your organization. Sophos strongly advises that you
take the following steps to prevent this:
1. Configure your firewall to prevent inbound connections to the Web Appliance from outside
your network.The Web Appliance does not require that any inbound ports be open for external
traffic.
2. Configure the Web Appliance to accept requests only from your own network. To do this:
a. Select Configuration > Group Policy > Default Groups.
b. Create a custom user group consisting of all your internal subnets and add this group to
the Selected groups list.
c. Select the Only the users/groups selected below option, and click Apply.
24 | Getting Started | Sophos Web Appliance

Sophos WS100 Specifications

General

Brand	Sophos
Model	WS100
Category	Firewall
Language	English