CRANEX Novus e 5. Unit Setup
User manual 208898 41
5.2 Image Preview (DIGORA for Windows software only)
The Image Preview feature allows an image to be
adjusted BEFORE it is saved. The adjustments
will be applied to the open image only or to ALL
subsequent images.
CAUTION:
Adjustments made to images CANNOT be undone
after the adjustments have been saved. If you wish
to “undo” the adjustments retrieve the original image
click Retrieve Last Image.
1. PC: In the Novus e Setup window click the
Show Image Preview check box.
2. Take an exposure.
3. PC: The Image Preview window will
automatically appear.
To activate image adjustment, click the Density
Adjustment and Sharpen fi lter check boxes.
The Image Quality Controls will become active
and the image can be adjusted.
CURRENT IMAGE ONLY
Click OK to apply the adjustments to the image
in the Image Preview window ONLY.
CURRENT AND ALL SUBSEQUENT IMAGES
Click the Edit Quality Presets button.
The Set Image Quality Presets window will
appear. The Get from Preview window radio
button will be active. Click OK to accept the
image adjustments you have made.
The Image Preview window will reappear. Click
OK to apply adjustments to the current image
and ALL subsequent images.
Approved: Ukkonen Juha-Pekka 2015-03-13 13:08
Reviewed: Savinen Antti Juhani 2015-03-12 11:32
Approved
See PDM system to determine the status of this document. Printed out: 2016-01-27 12:19:26
D508980, 4
Copyright © 2015 by PaloDEx Group Oy. All rights reserved.
To Next Page
Loading...
