User manual 208898 47
CRANEX Novus e 6. Troubleshooting and Maintenance
6.2 Care and Maintenance
Cleaning and disinfecting the unit
Warning
Switch the unit off before cleaning it.
Surfaces that the patient touches
All surfaces and parts that the patient touches or
comes into contact with must be disinfected after
each patient. Use a disinfectant that is formulated
specifi cally for disinfecting dental equipment
and use the disinfectant in accordance with the
manufacturer’s instructions.
Unit surfaces
Use a soft cloth dampened with a mild detergent/
disinfectant to clean unit surface. DO NOT use
abrasive cleaning agents or polishes on the unit.
Positioning mirror
The positioning mirror is made of glass. Use a soft
cloth dampened with a mild detergent to clean them.
DO NOT use abrasive cleaning agents or polishes
on these parts.
Touch screen control panel
If the surface of the control panel becomes soiled,
clean it with absorbent cotton or other soft cloth.
Remove any drops of liquid from the control panel
surface immediately. Prolonged contact with liquid
may cause the surface of the control panel to
discolor or spots to appear.
Approved: Ukkonen Juha-Pekka 2015-03-13 13:08
Reviewed: Savinen Antti Juhani 2015-03-12 11:32
Approved
See PDM system to determine the status of this document. Printed out: 2016-01-27 12:19:26
D508980, 4
Copyright © 2015 by PaloDEx Group Oy. All rights reserved.
To Next Page
Loading...
