Description of the Legend™
10
The EASYset™ user interface
Function Feature
Program memory keys freely programmable
Acceleration / deceleration profile 1 = slowest, ... 9 = fastest acceleration / deceleration curve
Setting speed by rpm adjustable from 300 rpm to 15 000 rpm, in 10 rpm increments
RCF selection upon activation of RCF switch , the RCF value can then be entered
Time selection adjustable in minutes from 1 min to 9 h 59 min,
or extended time mode from 1 min to 99 h,
”hld“-mode: continuous operation
Run time display in "quick run“ mode between 1 s and 60 s in seconds´ steps, above in minutes´ steps
Setting temperature * adjustable from -9°C to +40°C, in one degree increments
End of centrifugation the speed display will read "End“
( * only with refrigeration unit)
To Next Page
