Description of the Legend™
11
Function Feature
Lid opening automatic unlocking via ”Open lid“ key (
)
(unlocking in case of power failure: see chapter ”Troubleshooting“)
Start start key (
)
Stop stop key (
)
"Quick Run“ mode pressing the "Quick Run“ key (
) activates maximum acceleration up to the
maximum permissible speed of rotor; upon key release centrifuge stops with
maximum deceleration power.
Diagnostic messages
• alternating display ”Rotor“/maximum speed or RCF
(speed selected exceeds max. speed of the rotor)
• lid has not been lifted off the lock during opening:
display ”Lift lid“ (manual lifting of lid required)
• general instrument malfunction
(error messages with ERROR codes, see “Troubleshooting“)
To Next Page
