General Icons
226
Clinical Menu
Other
Calibrate cNIBP for continuous measurements. Patient’s PAT is not yet stable.
Stop a cuff inflation currently in progress.
Symbol Description
BP management. Setup the cuff inflation intervals.
Initiate the pause/stop monitoring sequence.
Initiate the stop monitoring sequence.
Initiate the pause monitoring sequence.
Access information regarding the ViSi Mobile Monitor: Monitor ID, MAC address, Serial
#, software version installed and battery status.
Alarm management. Review the patient’s current alarm limits, adjust the alarm limits using
“Auto Set” or turn off the alarm annunciation.
QRS beep is turned on.
QRS beep is turned off.
Symbol Description
Change a patient’s alarm limits using “Auto Set”.
Setup cuff inflation to be on a PRN basis.
Symbol Description
To Next Page