Sotera VISI - To Remove Cuff and Cuff Module; To Remove the Chest Sensor Cablechest Sensor; XML File

Clinical Configurations
77
4. If the patient will no longer be monitored, dispose of the Wrist Cradle and Wrist Strap according to
your facility’s policy.
Clean the reusable components of the System: Monitor, Chest Sensor, Thumb Sensor, and Cuff Module, in
accordance with your facility’s procedures and the cleaning recommendations in this manual. See
Chapter 7. User/Preventative Maintenance on page 105.
5.5 Clinical Configurations
5.5.1 .XML File
The configuration options in the table below will configure the Monitor for the Facility’s Care Unit
through the .XML file that is stored on the server. Once the Monitor has connected to the network, the
clinical configurations will automatically be updated to the configurations set in the .XML file.
Note: Once the Monitor has connected to the network, any other configurations that were
previoulsy set using, including while in Bio Med Mode, will be over-written.