Important safety instructions
14 Operating Instructions Soyer Bolzenschweißtechnik
2.4 Intended use of the stud welding device
With the SOYER® BMS-8N capacitor discharge stud welding device, pins and
threaded studs from M3 to M8 (M3 to M10 with BMS-8NV) as well as many differ-
ent weld fasteners made of steel, stainless steel, aluminium and brass can be
welded in accordance with DIN EN ISO 13918 (capacitor discharge).
Special studs or diameters upon request.
The stud welding device can only be operated with the welding guns described in
chapter “6.5 Permitted stud welding guns” on page 24.
The stud welding device must be operated within the scope of technical data.
2.4.1 Incorrect use
Any use of the device deviating from the intended use is considered as not intended.
Not intended use, unauthorised modification or manipulation of the device will
void the declaration of conformity and warranty claims against the manufacturer.
2.5 Intended use of the stud welding guns
With the SOYER® stud welding guns, pins and threaded studs from M3 to M8
(up to M10 with special gun and adapter) as well as many different weld fasteners
made of steel, stainless steel, aluminium and brass can be welded in accordance
with DIN EN ISO 13918 (capacitor discharge).
Special studs or diameters upon request.
The stud welding gun can only be operated with the stud welding devices de-
scribed in chapter “6.4 Technical data on BMS-8N(V) stud welding device” on
page 23 and chapter “9.1 Technical data for the PS-1K stud welding gun” on
page 33.
The stud welding gun can only be operated within the scope of technical data.
2.5.1 Incorrect use
Every use of the welding gun deviating from the intended use is considered as not
intended.
Not intended use, unauthorised modification or manipulation of the device will
void the declaration of conformity and warranty claims against the manufacturer.
Misusing the gun as a tool, e.g. as a striking tool for checking the welding quality,
is not permitted.
To Next Page
Loading...
