Soyer BMS-8NV - Manufacturer and Training Information; Relevant Standards and Directives

General information
8 Operating Instructions Soyer Bolzenschweißtechnik
1.3 Manufacturer
The manufacturer of the devices is:
Heinz Soyer Bolzenschweißtechnik GmbH
Inninger Straße 14
82237 Wörthsee
Phone: 0049-8153-885-0
Fax: 0049-8153-8030
Email: info@soyer.de
Web: www.soyer.de, www.soyer.com
1.4 Instruction, training
Soyer offers optional and individual instruction in the operation of the devices.
Moreover, Soyer offers training for customer-specific use of the
devices. The tutorial is available at:
https://www.youtube.com/watch?v=u4JXk8Gzsmg
Information on the scope and costs of instruction and training can be obtained
from Soyer GmbH.
1.5 Standards and directives
The following standards, inter alia, must be observed for carrying out stud welding
work and for the qualification of personnel:
• DIN EN ISO 14555 Welding - Arc stud welding of metallic materials
• DIN EN ISO 14732 Welding personnel - Qualification testing of welding
operators and weld setters for mechanised and automatic welding of metallic
materials
• DIN EN 60974-9 Arc welding equipment - Installation and use
• Technical Bulletin DVS 0903 Capacitor-discharge stud welding with tip ignition
• Technical Bulletin DVS 0904 Instruction for practice - Arc stud welding
i
Also see our video instructions at
www.youtube.com/user/SoyerGmbH.