Important safety instructions
Operating Instructions Soyer Bolzenschweißtechnik 9
2. Important safety instructions
Read the following chapters carefully and follow the safety instructions. Please
contact the manufacturer if you are uncertain or an instruction cannot be followed.
The devices have been constructed in accordance with the generally accepted
codes of practice and established and usual safety requirements were observed
and applied. In order to reach maximum safety, it is absolutely necessary to follow
and observe all safety instructions specified in these operating instructions.
2.1 Warning signs used
Warning signs are used in this document, depending on the potential danger of
the situation.
Safety and information symbols used in this manual
This warning sign indicates imminent danger lead-
ing to severe injuries or death.
This warning sign indicates a potentially dangerous
situation that may lead to severe injuries or death.
This warning sign indicates a potentially dangerous
situation that may lead to minor injuries.
Without the warning triangle, this warning sign is
also used in the event of danger of material dam-
age.
Additional sign indicating danger from electric cur-
rent. The additional sign is used in connection with
a warning.
Additional sign indicating the danger of burns. The
additional sign is used in connection with a warn-
ing.
Do not touch the surface or the housing: Shock
hazard.
Do not touch or open, danger to unauthorised per-
sons.
Danger to persons with medical implants such as
pacemakers.
The information sign is not a warning sign. It indi-
cates important and useful information on the sub-
ject.
i
To Next Page
Loading...
