Description of the PS-3K and PS-3K Stativ stud welding guns
Operating Instructions Soyer Bolzenschweißtechnik 37
10.2 Cleaning of the stud welding gun
On a regular basis, remove slag and welding spatters from the gun and the gun
legs/support using a suitable tool.
The frequency of cleaning depends on the operating conditions of the stud
welding gun.
Risk of injury during cleaning
Welding spatters and slag can be sharp-edged.
• Wear protective gloves when cleaning.
We recommend the use of SOYER® separating spray in order to prevent
impurities from welding spatters and slag and to simplify the cleaning
process.
To Next Page
Loading...
