Welding operation
Operating Instructions Soyer Bolzenschweißtechnik 49
14. Welding operation
In the following, it is described how weldings are carried out and how possible
welding errors can be avoided.
14.1 Carrying out welding
In the following, it is described how weldings are carried out with a stud welding
gun.
Danger from incorrect operation
During stud welding, incorrect operation of the devices may cause many
dangers.
• Before using the stud welding device, see chapter “2. Important safety
instructions” on page 9.
• If you have any problems understanding the operating instructions, contact
the manufacturer, Soyer.
Carrying out welding
Step 1:
WARNING
Before welding, see chapter “2. Important safety instruc-
tions” on page 9
Step 2: Connect the gun to the stud welding device (see chapter “12.2
Connection of the stud welding device and the stud welding
guns” on page 44).
Check if a connection adapter may be required.
Step 3: Insert the appropriate stud chuck and a welding stud (see the
descriptions of the stud welding guns and chapter “11. Descrip-
tion of the stud chuck” on page 38).
Only use SOYER® welding studs.
Step 4: Check the charging voltage (see chapter “13.1 Adjusting the
charging voltage on the stud welding device” on page 47).
Step 5: Ensure that the welding points on the stud and workpiece are
metallically bright.
To Next Page
Loading...
