Soyer BMS-8NV - Operating Company Prerequisites; Prerequisites for Personnel

Important safety instructions
Operating Instructions Soyer Bolzenschweißtechnik 15
2.6 Operating company prerequisites
The operating company of the device must ensure that the prerequisites de-
scribed in these operating instructions for a safe operation of the device are met.
These include, for example, conditions at the installation location, regulatory re-
quirements on a safe workplace, instruction of operating personnel and qualified
personnel in using the device, if applicable, compliance with required mainte-
nance work as well as monitoring the intended use of the device.
These operating instructions must be stored in the vicinity of the device.
The operating company of the device must ensure that all protective devices are
present, active and intact before the device is used.
2.6.1 Prerequisites for personnel
Operating
personnel
Persons authorised to operate the device must be familiar with the device and
trained accordingly. They must have read and understood these operating in-
structions. When working on the device, they must also be able to avert possible
residual danger to themselves or third parties or minimise them as far as possible.
To retain this qualification, safety training must be carried out at least once a year.
If necessary, specially trained personnel or the manufacturer must be consulted
in case of failure or for maintenance work.
Operators of stud welding devices must have technical expertise for operating
and adjusting the device properly as well as for properly carrying out weldings.
If welding personnel has to be qualified for certification of welding, the standards
DIN EN ISO 14555 and DIN EN ISO 14732 are to be observed.
Trained
electrotechnical
personnel
As a general principle, works on live elements may only be performed by qualified
electricians. This work must be performed in accordance with the applicable tech-
nical rules for electrotechnical devices.
i
All devices of Soyer Bolzenschweißtechnik GmbH must only be opened
by personnel of Soyer or personnel authorised by Soyer.