Space ER 200 - Safety Devices; Technical Details

INSTRUCTION MANUAL
SPACE s.r.l.
ER 200 - ER 220
ER150 - ER160 - ER165
Code M0076 - rev.1.6
(04/2005)
SPACE s.r.l. – 10090 Trana (TO) Via Sangano, 48 Page 7/ 40
Tel. (+39) 011/ 933.88.65 – Fax (+39) 011/ 933.88.64
e-mail: info@spacetest.com
3.3 Safety devices
The wheel balancer features a number of safety devices. One of these is located on the
rear of the machine (master switch), see chap. 3, page 5. The master switch interrupts
power to the machine when turned clockwise.
In the case of model ER165 it is best to close the protection guard before spinning the wheel.
(key F1 on keyboard) can be pressed if required to manually stop the wheel in
case of an emergency.
3.4 Technical details
ER200
ER150
ER220
ER160
ER165
Max wheel weight
65kg
65kg 65kg
Max power absorption
40W
100W 100W
Power supply
230V 50/60Hz 1ph
230V 50/60Hz 1ph 230V 50/60Hz 1ph
Balancing precision
± 1g
± 1g ± 1g
Balancing speed
99 rpm
99 rpm 99 rpm
Min/max rim - machine distance
0÷400mm
0÷400mm 0÷400mm
Rim width setting
1.5” ÷ 22”
1.5” ÷ 22” 1.5” ÷ 22”
Diameter setting
10” ÷ 24”
10” ÷ 24” 10” ÷ 24”
Max wheel diameter inside protection
-
-1016mm
Max wheel width inside protection
-
-560mm
Sound emission level < 70 dB < 70 dB < 70 dB
Cycle time 7 sec 7 sec 7 sec
Weight
78kg (ER200)
68kg
(ER150)
82kg (ER220)
72kg (ER160)
80kg (ER165)