How to prevent metal fatigue on Spearhead Lawn Mower?
To address metal fatigue on the fabrication of your Spearhead Lawn Mower, slow down your working/transportation speed. Review the guidance to correctly drive the machine correctly in work and during transportation. Re-adjust the position of the top link between the tractor and machine in order to create slack in the wire ropes if the machine is not floating correctly.
How to reduce excessive skid wear on Spearhead Lawn Mower?
To prevent excessive skid wear on your Spearhead Lawn Mower, adjust the machine to the correct height.
Defines the intended applications and operational parameters for the Multicut 300 rotary mower.
Specifies the permissible applications for the Multicut 300, including cutting set-aside, stubble, and pasture.
Lists prohibited uses of the machine and the manufacturer's disclaimer for misuse.
Provides a layout and naming convention for the machine's parts and assemblies.
Illustrates the general layout and key components of the Multicut 300 mower with numbered parts.
Explains the data found on the machine's serial plate for identification and compliance.
Shows the physical location of the serial plate on the machine's front channel.
Defines clockwise and anti-clockwise rotor rotation for front and rear mounted Multicut 300.
Illustrates definitions for tractor PTO shaft rotation, clockwise and anti-clockwise.
Details the standard technical specifications for the Multicut 300 mower, including tractor, PTO, and machine dimensions.
Illustrates the working and transport dimensions (A, B, C, D, E) of the Multicut 300.
Outlines available optional specifications for the Multicut 300, such as gearbox, PTO shaft, and blade carriers.
Details the standard and optional axle/tyre configurations for the Multicut 300 machine.
Explains the danger level indicators (DANGER, WARNING, CAUTION) and defines key safety terms.
Provides essential guidelines for the safe operation of the machine and user responsibilities.
Covers safe transport procedures and guidelines for storing the machine when not in use.
Outlines essential safety procedures before and during maintenance operations on the machine.
Details safety decals, their meanings, and the mandatory guards for safe operation.
Covers sound levels, required PPE, and environmental considerations for machine use.
Explains the meaning and purpose of various safety and operational decals found on the machine.
Details additional safety and instruction decals, including PTO speed and P65 warnings.
Shows the specific locations where safety and instruction decals are applied to the Multicut 300.
Lists the essential guards that must be fitted and maintained for safe cutting operations.
Provides guidance on the responsible disposal of machine components and materials at the end of its life.
Alerts users to potential exposure to chemicals known to cause cancer or reproductive harm.
Details the correct procedure and recommended lifting points for safely moving the machine.
Outlines essential pre-operation inspections for both the tractor and the Multicut 300 machine.
Guides on adjusting the PTO shaft length and overlap for correct installation and safe operation.
Describes the procedure to test and ensure the PTO shaft is correctly shortened to prevent bottoming out.
Provides instructions for modifying and shortening the input PTO shaft safely and correctly.
Details the steps for shortening drive tubes, shield tubes, and greasing the internal drive tube.
Refers to Section 4.4 for detailed guidance on fitting the PTO shaft between the machine and tractor.
Outlines essential requirements for operators, including reading manuals, PPE, and avoiding drugs/alcohol.
Specifies the necessary tractor characteristics, safety devices, and capabilities for operating the Multicut 300.
Provides step-by-step instructions for safely connecting the Multicut 300 to the tractor.
Details the reverse procedure for safely disconnecting the machine from the tractor and preparing for storage.
Explains the critical steps and safety warnings for fitting and removing the input PTO shaft.
Details the procedure for fitting the input PTO shaft to both the machine and tractor ends.
Lists PTO shaft speed options (540/1000 RPM) and spline quantity requirements.
Guides on adjusting the machine for proper front-to-rear levelling to ensure uniform cut and efficiency.
Illustrates how tyre sinking can affect cutting height and advises on adjusting for soft conditions.
Explains how to adjust cutting height using wheel arm positions, orientation, and yoke spacers.
Details the three main variables (pin holes, orientation, yoke spacers) for adjusting the cutting height.
Provides a reference table for achieving various cutting heights based on adjustment settings.
Guides on identifying and mitigating risks from foreign objects in the work area before mowing.
Details procedures for emergency stops and maintaining safe distances from bystanders during operation.
Advises on operating conditions, visibility, and avoiding mowing in adverse weather or poor lighting.
Provides guidelines to prevent equipment and grass fires during operation and maintenance.
Covers essential safety measures and operator experience needed for driving the tractor with the attached machine.
Details safe driving on roads, visibility, traffic regulations, and avoiding collisions.
Step-by-step guide on safely engaging and disengaging the Power Take-off (PTO) for machine operation.
Discusses forward speed, PTO speed, and gear selection for optimal cutting performance.
Provides guidance on safe cornering, crossing ditches, and operating on inclines and slopes.
Advises on adjusting mower height and position when operating on uneven terrain to prevent blade contact.
Details safety precautions for transporting the machine on public roads, including weight and speed limits.
Provides guidance on safely loading, securing, and transporting the machine on a trailer.
Outlines general procedures for routine service, repairs, and lubrication to ensure longevity.
Covers essential lubrication practices for driveline and gearbox components for optimal performance.
Details the types of oil and procedures for checking and filling the splitter and rotor gearboxes.
Specifies oil capacities for gearboxes and illustrates their locations on the machine.
Provides component identification and oil check/fill procedures for the splitter gearbox.
Details component identification and oil check/fill procedures for the rotor gearboxes.
Explains the importance and procedure for lubricating PTO shafts, including grease points.
Covers adjusting PTO shaft length and replacing bearing rings for proper function and safety.
Describes the two types of blade carriers available: standard with anti-scalp dish and heavy duty.
Guides on inspecting blades for wear, damage, and ensuring proper installation for rotor balance.
Warns about hazards related to falling blades during maintenance and working under the machine.
Advises against sharpening or straightening blades due to potential failure and safety risks.
Details the procedure for removing and replacing blades, including the use of new fasteners and bushes.
Emphasizes daily inspection of blade bolts for damage to prevent catastrophic failure.
Guides on inspecting anti-scalp dishes for proper installation, security, and condition.
Warns about hazards related to falling blade carriers during maintenance and working under the machine.
Details the process for removing anti-scalp dishes, blades, and blade carriers.
Covers removing upper blade carriers, inspecting gearbox shafts, and checking splines.
Guides on reassembling blade carriers and ensuring correct blade timing for operation.
Emphasizes checking for play in splines and using genuine Spearhead parts for safety and reliability.
Illustrates the Multicut wheel and fork assembly, highlighting standard and optional laminated wheel types.
Specifies tyre pressure requirements for the Multicut 300 for optimal performance and safety.
Details the greasing requirements for laminated wheel hubs to ensure longevity.
Guides on inspecting pins and bushes for wear, damage, or looseness to ensure safe operation.
Emphasizes the importance of inspecting and replacing skids to prevent damage to the machine deck.
Lists specific torque settings for critical fasteners like gearbox and blade bolts.
Provides recommended torque settings for general fasteners used on Spearhead machines.
Checklist for visual inspection of the machine before operation, covering manuals, parts, and safety features.
Checklist for mechanical checks, including gearbox oil, fasteners, and greasing points.
Outlines operational checks to perform after visual and mechanical inspections, focusing on vibration and noise.
Details steps for preparing the Multicut machine for storage to preserve its condition and ensure ease of reintroduction.
Outlines the procedure for returning the machine to service after a period of storage.
Addresses causes and remedies for irregular cutting performance, such as worn blades or incorrect PTO speed.
Provides solutions for machine noise, vibration, and related issues like loose bolts or fabrication damage.
Covers issues related to gearbox noise, oil levels, worn gears, bearings, and leaks.
Offers remedies for damaged blades, carriers, bolts, and bushes, emphasizing replacement and balance.
Addresses issues with PTO shafts, including telescopic guard problems, speed, overlap, and lubrication.
Covers causes and remedies for gearbox oil leaks, breather faults, and metal fatigue on fabrications.
Addresses problems related to excessive skid wear and improper machine floating.
Guides on using the Spearhead interactive online parts database to find correct part numbers via serial number.
Explains that spare parts must be ordered through a Spearhead dealer.
Provides information on finding a local Spearhead dealer using the website's locator facility.
General| Brand | Spearhead |
|---|---|
| Model | Multicut 300 |
| Category | Farm Equipment |
| Language | English |
To Next Page
