Technical Manual MX800 Transceiver
© SPECTRA ENGINEERING 2006 Revision 4.2.3
i
Spectra Engineering Pty Ltd
ABN 65 057 696 438
9 Trade Road
Malaga
Western Australia 6090
Tel: +61-8-92482755 Fax: +61-8-92482756
Email:
info@spectraeng.com.au
Web: www.spectraeng.com.au
Manual Revision 4.2.3 August 2006
In order to continually improve our products, Spectra Engineering Pty Ltd reserves
the right to alter, without notice and at any time, the equipment and specifications
described in this document.
All performance figures quoted are typical and are subject to normal manufacturing
and service tolerances.
The purchaser is warned that statements made in this document may be inaccurate
due to typographical or other errors or subsequent modifications of the product.
While every care has been taken in the creation of this document, no warranty of
accuracy or reliability is given, in any advice or information contained in this
document. The responsibility for any loss or damage whatsoever arising in any way
or any representation, act or omission whether express or implied (including
responsibility to any person by reason of negligence) is not accepted by Spectra
Engineering Pty Ltd or any director, officer, agent or employee of Spectra
Engineering Pty Ltd.
Copyright © Spectra Engineering Pty Ltd 1997-2006.
This work is copyright. Other than as permitted by Law, no part of it may be
reproduced, stored in a retrieval system or transmitted in any form or by any process
without prior written permission.
FCC Interference Warning
Note: The equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial or residential environment. This equipment generates, uses
and can radiate radio frequency energy. If not installed and used in accordance with
this instruction manual, may cause harmful interference to radio communication.
To Next Page
Loading...