SpectraLink 8440 - Page 100

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 100
Parameter
Permitted Values
Default
dir.corp.filterPrefix
1
UTF-8 encoded string
(objectclass=person)
The predefined filter string for search queries.
dir.corp.pageSize
1
8 to 64
32
The maximum number of entries requested from the corporate directory server with each query.
dir.corp.password
1
UTF-8 encoded string
Null
The password used to authenticate to the LDAP server.
dir.corp.port
1
0, 1 to 65535
389 (TCP) 636 (TLS)
The port that connects to the server if a full URL is not provided. When the value is set to 0, the default value will
be used.
dir.corp.scope
1
one, sub, base
sub
The type of search that is performed. If one, a search of one level below the base domain name (DN). If sub, a
recursive search of all levels below the base DN. If base, a search at the base DN level.
dir.corp.sortControl
1
0 or 1
0
Controls how a client can make queries and sorts entries locally. If 0, leave sorting as negotiated between the
client and server. If 1, force sorting of queries (this causes excessive LDAP queries and should only be used to
diagnose LDAP servers with sorting problems).
dir.corp.transport
1
TCP, TLS, Null
TCP
Specifies whether a TCP or TLS connection is made with the server, if a full URL is not provided.
dir.corp.useContainsSearch
1
0 or 1
0
When set to 0, the search will compare the entered characters against the starting characters of each field
searched. This is the default behavior. When set to 1, the search will look for the entered characters anywhere
inside each corporate directory field.
dir.corp.user
1
UTF-8 encoded string
Null
The user name used to authenticate to the LDAP server.
dir.corp.viewPersistence
1
0 or 1
0
If 0, the corporate directory search filters and browsing position are reset each time the user accesses the
corporate directory. If 1, the search filters and browsing position from the previous session are displayed each time
the user accesses the corporate directory.
dir.corp.vlv.allow
1
0 or 1
0
If 0, virtual view list (VLV) queries are disabled. If 1, VLV queries are enabled and can be made if the LDAP server
supports VLV.
dir.corp.vlv.sortOrder
1
list of parameters
Null
The list of parameters —in exact order — for the LDAP server to use when indexing. For example: sn,
givenName, telephoneNumber.
1
Change causes handset to restart or reboot.
The following illustration points you to the minimum parameters you need to set. You will need
to enter a corporate directory address in dir.corp.address. You will need to specify where
on the corporate directory server you want to make queries in dir.corp.baseDN. In addition,
you will require a user name and password. The dir.corp.attribute.x.name must match
the attributes in the server.