Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 101
Default Ring Tones and Alert Tones
In different countries, different ring and tone patterns are used for a busy signal or reorder tone,
for example. This section explains how to change the default ring tones and alert tones to the
customary tones used in your area. See the sound effects pattern types table for more
information.
Additionally, the handset can use built-in wave files for some sound effects. The built-in wave
files can be replaced with files downloaded from the provisioning server or from the Internet.
These are stored in volatile memory so the files will need to remain accessible should the
handset need to be rebooted. Files will be truncated to a maximum size of 300 kilobytes.
The following sampled audio WAVE (.wav) file formats are supported:
mono 8 kHz G.711 u-Law
G.711 A-Law
Your custom sampled audio files must be available at the path or URL specified by saf.x so
the handset can download them at bootup. Include the name of the file and the .wav extension
in the path. In the following example, you can see that the tones are at the top level of the zip
file structure when the code is downloaded.
To Next Page
