Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 60
environments. When packets are lost, a concealment algorithm minimizes the resulting negative
audio consequences.
Low-Delay Audio Packet Transmission
The handset is designed to minimize latency for audio packet transmission.
Call Timer
A call timer displays on the handset’s screen. A separate call duration timer displays the hours,
minutes, and seconds of each call in progress.
There are no related configuration changes.
Called Party Identification
By default, the handset displays and logs the identity of parties called from the handset. The
handset obtains called party identity from the network signaling. Because Called Party
Identification is a default state, the handset will display caller IDs matched to the call server and
does not match IDs to entries in the Local Contact Directory or Corporate Directory.
There are no related configuration changes.
Connected Party Identification
By default, the handset displays and logs the identity of remote parties you connect to if the call
server can derive the name and ID from the network signaling. Note that in cases where remote
parties have set up certain call features, the remote party you connect to—and the caller ID that
displays on the handset—may be different than the intended party. For example, Bob places a
call to Alice, but Alice has call diversion configured to divert Bob’s incoming calls to Fred. In this
case, the handset will log and display the connection between Bob and Fred. Note that the
handset does not match party IDs to entries in the contact directory or the corporate directory.
Microphone Mute
The handsets have a microphone mute softkey. When you activate microphone mute, a mute
icon will display on the status bar.
No configuration changes can be made to the microphone mute feature.
To Next Page
Loading...
