Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 28
Timesaver: Reducing repetitive data entry
Spectralink recommends using DHCP where possible to eliminate repetitive
manual data entry.
The following table details the settings that are supported through the DHCP menu:
Auto discovery of the root CA certificate. If this setting is unavailable,
set the parameter per this guide.
Web Info: RFC information on DHCP options
For more information on DHCP options, see RFC 2131 and RFC 2132.
Settings: Overriding the SNTP values set by DHCP
The configuration file value for SNTP server address and SNTP GMT offset can
be configured to override the DHCP value. See
tcpIpApp.sntp.address.overrideDHCP.
If you do not have control of your DHCP server or do not have the ability to set the DHCP
options, you will need to enable the handset to automatically discover the provisioning server
address. One way is to connect to a secondary DHCP server that responds to DHCP INFORM
queries with a requested provisioning server value. For more information, see RFC 3361 and
RFC 3925.
Provisioning Server Discovery
After the handset has established network connectivity it proceeds to the Configuration stage. In
this stage the following steps are carried out:
Software Update
Application of configuration settings relevant to a customer network
To Next Page
Loading...
