SpectraLink 8440 - Call Lists

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 95
Call Lists
Table 8-11: Call List (Call Log) Parameters
Parameter
Permitted Values
Default
feature.callList.enabled
1
All locally controlled call lists.
feature.callListMissed.enabled
1
The missed calls list.
feature.callListPlaced.enabled
1
The placed calls list.
feature.callListReceived.enabled
1
The received calls list.
0 or 1
0 or 1
0 or 1
0 or 1
1
1
1
1
If 0, the call list is disabled. If 1, the call list is enabled. To enable the Missed, Placed, or Received call lists,
feature.callList.enabled must be enabled.
callLists.grouping
Unified, InOut,
InOutMissed
Unified
Used by callLists.collapseDuplicates and callLists.size.
Unified - apply the limit in callLists.size to the total number of call list entries, regardless of their type.
InOut - apply the limit to incoming (Received + Missed) calls, and apply it separately to outgoing (Placed) calls.
Thus, the total number of call list entries is actually twice that specified in callLists.size.
InOutMissed - apply the limit to Missed calls, and then separately to Placed Calls, and then separately again to
Received calls. Thus, the total number of allowed call list entries is three times that specified in callLists.size.
callLists.collapseDuplicates
0 or 1
1
If 0, all calls are archived and presented in the call lists. If 1, consecutive incomplete calls between the same party
in the same direction (outgoing/incoming) are collapsed into one record with the most recent call displaying.
callLists.logConsultationCalls
0 or 1
0
If 1, all consultation calls are logged. (Calls made to a third party—while the original party is on hold—when
settings up a conference call are called consultation calls.)
If 0, consultation calls are not logged.
callLists.size
10 to 99
99
The maximum number of retained records of each type (incoming, outgoing, and missed). When the maximum
number is reached, new records will overwrite existing records. You can clear the list using the handset’s menu
system. If you want to prevent the records from uploading to the provisioning server, enter a false URL in the
CALL_LISTS_DIRECTORY field in the master configuration file.
callLists.writeDelay.journal
1 to 600
5
The delay (in seconds) before changes due to an in-progress call are flushed to the file system as a journal.
callLists.writeDelay.terminated
10 to 600
60
The minimum period between writing out the complete XML file to the local file system and, optionally, to the
provisioning server.
1
Change causes handset to restart or reboot.
Miscellaneous Call Handling Parameters
The handset supports an optional per-registration feature that enables automatic call placement
when the handset is off-hook.