SpectraLink 8440 - Page 78

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 78
Caution: Some language parameters may overrule lcl.dateline parameters.
Certain languages use date and time settings that overrule lcl.dateline parameters.
See the Languages section for details.
Table 7-10: Setting the Time and Date Display
Parameter
Permitted Values
Default
up.localClockEnabled
0 or 1
1
If 0, the date and time are not shown on the idle display. If 1, the date and time and shown on the idle display.
lcl.datetime.date.format
string which includes ‘D’, ‘d’ and
‘M’ and two optional commas
D,Md
Controls format of date string. D = day of week, d = day, M = month.
Up to two commas may be included.
For example: D,dM = Thursday, 3 July or Md,D = July 3, Thursday
The field may contain 0, 1 or 2 commas which can occur only between characters and only one at a time. For
example: “D,,dM” is illegal.
lcl.datetime.date.longFormat
0 or 1
1
If set to 1, display the day and month in long format (Friday/November), otherwise, use abbreviations (Fri/Nov).
lcl.datetime.time.24HourClock
0 or 1
0
If set to 1, display time in 24-hour clock mode rather than a.m./p.m.
Table 7-11: Date Formats
lcl.datetime.date.format
lcl.datetime.date.longformat
Date Displayed on Phone
dM,D
0
19 Aug, Fri
dM,D
1
19 August, Friday
Md,D
0
Aug 19, Fri
Md,D
1
August 19, Friday
D,dM
0
Fri, 19 Aug
D,dM
1
Friday, 19 August
D,Md
0
Fri, Aug 19
D,Md
1
Friday, August 19
DD/MM/YY
n/a
19/08/11
DD/MM/YYYY
n/a
19/08/2011
MM/DD/YY
n/a
08/19/11
MM/DD/YYYY
n/a
08/19/2011
YY/MM/DD
n/a
11/08/19
YYYY/MM/DD
n/a
2011/08/19