Name: Spektrum NX20
Brand: Spektrum
Rating: 5 (1 reviews)

To Next Page

To Previous Page

53SPEKTRUM NX20 • TRANSMITTER INSTRUCTION MANUAL

The Motor Cut menu option enables you to assign a switch position

to stop the motor. Motor Cut activates regardless of Flight Mode.

When you activate Motor Cut, the ALT channel moves to the pre-

programmed position (normally Off).

You may need to use a negative value to move the ALT channel to

the off position.

CAUTION: Always test the model after making

adjustments to make sure the model responds to

controls as desired.

You can use the Motor Curve menu option to optimize the throttle

response. A maximum of 7 points are available on the throttle curve.

To add points to a Motor Curve:

1. Move the throttle stick to the position where you wish to add

the new point.

2. Scroll to Add Pt. and press the scroll wheel to add the point.

To remove points from a Motor Curve:

1. Move the motor stick until the cursor is near the point you

wish to remove.

2. Scroll to Remove Pt. and press the scroll wheel once to

remove the point.

If you program multiple throttle curves and you wish to edit one of

the curves, that curve must be active in the Motor Curve screen

before you can make any changes.

Motor Cut (Function List)

Motor Curve (Function List)

Questions and Answers:

Need help?

Do you have a question about the Spektrum NX20 and is the answer not in the manual?

Spektrum NX20 Specifications

General