Spirax Sarco SP7-10 - Parameter Group 9: Digital Output; ALRM_LOG: Alarm Output Logic; SW1_LOG: Switchpoint 1 Logic; SW2_LOG: Switchpoint 2 Logic

47
IM-S51-07 CTLS Issue 1
SP7-10, SP7-11, SP7-12 and SP7-20, SP7-21, SP7-22 Parameterization
You can use this parameter to define the active state for switch output SW2 (on the plug in module for digital feedback).
ACTIV_HI active = output current I > 2 mA
ACTIV_LO active = output current I < 1 mA
3.13 Parameter group 9: digital output
3.13.1 ALRM_LOG – Alarm output logic
With this parameter you can determine the logic level of the alarm output.
ACTIV_HI active = output current I > 2 mA
ACTIV_LO active = output current I < 1 mA
3.13.2 SW1_LOG – Logic
You can use this parameter to define the active state for switch output SW1 (on the plug-in module for digital feedback).
ACTIV_HI active = output current I > 2 mA
ACTIV_LO active = output current I < 1 mA
3.13.3 SW2_LOG – Logic