59
IM-S51-07 CTLS Issue 1
SP7-10, SP7-11, SP7-12 and SP7-20, SP7-21, SP7-22 Parameterization
4.1b Specific SP7-11/12 and SP7-21/22 Error messages:-
Error description Error code
Meaning:
Defective memory chip
Impact:
Device does not boot up.
Measure(s):
Return the device for repair
Meaning:
Auto adjust function lasts too long.
Impact:
Auto adjust function is aborted.
Measure(s):
Increase the suppy pressure or use boosters.
Meaning:
Mounting conditions not correct. Position outside sensor range.
Impact:
Auto adjust function is aborted.
Measure(s):
Check mounting conditions.
Meaning:
a) Inconsistent data, e.g., low value > than high value, or incorrect configuration.
b) Data cannot be saved locally, as PROFIBUS saves data in the background.
Impact:
a) Auto adjust function is aborted.
b) Saving is not possible.
Measure(s):
a) Correct values or load factory settings
b) Try agail at a later point
To Next Page
Loading...
