14
3.4 Setting the language
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting Language”. Now press the
right rotary knob.
The current language setting will appear on the display.
Now press the right rotary knob.
The current language setting will flash intermittently on the display
screen.
Turn the right rotary knob to select the required language. Now
press the right rotary knob.
Turn the right rotary knob to “Language Exit”. Now press the
right rotary knob.
The “Setting Language” message will appear on the display.
Turn the right rotary knob to “Setting Exit”. Now press the right
rotary knob.
The first menu level will appear on the display. The machine is now
ready for use.
3.5 Setting the rinsing function (Off-rinse)
You have the option of selecting an automatic rinse function, which is
activated when the machine is switched off.
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “O-rinse”. Now press the right
rotary knob.
Turn the right rotary knob to “O-rinse Yes”. This will activate
the rinse out function once the machine has been switched o.
Press the right rotary knob to conrm your selection.
Turn the right rotary knob to “O-rinse Exit”. Now press the right
rotary knob.
The “Setting Off-rinse” message will appear on the display.
Turn the right rotary knob to “Setting Exit”. Now press the right
rotary knob.
The first menu level will appear on the display. The machine is now
ready for use.
3.6 Setting ECO-Mode operation
Your machine is fitted with a power-saving function (ECO-Mode). The
function is activated before the machine leaves the factory and is
designed to switch the machine to minimum heating mode 3 minutes
(factory setting) after its last use. This allows the machine to remain
in operation on reduced power. If you start making coffee after the
machine has been in ECO-Mode, you will have to wait a few seconds
longer for the machine to heat up.
The ECO-Mode function can be deactivated or altered. If the function
is deactivated, your machine will remain in operation at all times on
full power.
3. SELECTING/ALTERING BASIC SETTINGS
To Next Page
Loading...
