32
Turn the right rotary knob to the required setting.
On your display, the “ml symbol” will ash (rst for the amount of
milk, then for the amount of froth). You are still able to alter these
parameters, while they are ashing.
If you wish to stop preparation of your drink, press the right
rotary knob.
The “Brewing aborted” message then appears on the display.
4.6 Preparing “My coee”
You can use your machine to make coee according to your own
preferences, independently of all other standard settings. The standard
factory settings for “My coee” are: Latte Macchiato, Volume 300 ml,
Aroma “normal”. The display shows “My coee”.
You can prepare “My coee” in two ways:
1. You can select the standard settings from the “Recipe” menu.
These are the factory settings. However, you can change these
settings, as described below.
2. You can change the setting to suit your personal taste while
making your individual preparation. The standard settings
then remain unchanged.
4.6.1 Preparing “My coee” using standard settings
Place a cup under the spout (Fig 5).
Turn the right rotary knob to “My coee”. Now press the right
rotary knob.
The cup illuminates and your machine will now prepare a cup of “My
coee” using the standard settings.
Altering the standard settings in one of two ways:
a) Live Programming
The standard settings can be altered (and the new settings saved)
while your milk is being prepared:
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting Recipe”. Now press the
right rotary knob.
Turn the right rotary knob to “Recipe My coee”. Now press the
right rotary knob.
“My Coee” and the name of the drinks currently saved will appear
in the display.
Now press the right rotary knob. Turn the right rotary knob to
select your required drink.
Now press the right rotary knob to conrm your drink selection.
Turn the right rotary knob to “Start live Prog.”.
To alter the standard settings, press the right rotary knob.
4. PREPARING SPECIALITY COFFEES
To Next Page
Loading...
