Sprada TX5 - Preparing Warm Milk (E.g. for Hot Chocolate)

29
4.4.2 Preparing a Latte Macchiato to individual taste
Your machine allows you to prepare each Latte Macchiato to your
individual taste, independent of the standard settings in the “Setting
Recipe” menu.
 In the main menu, turn the right rotary knob to “Latte Macchiato”.
 Turn the left rotary knob to alter the amount of coee (in ml).
When altering the amount of coee, the proportion of milk to
froth and coee remains unchanged.
 Press the left rotary knob to alter the strength of your coee. The
more beans shown on the display, the stronger the coee.
Note: Your machine cannot be programmed to prepare more
than one cup or glass of any drink containing milk.
 Place your cup or glass centrally under the spout (Fig 5).
 Begin the preparation process by pressing the right rotary knob.
Note: If you began preparation too early, or have made a selection
error, you can still change some of the parameters while your
drink is being prepared. These parameters are shown on the
bottom row of the display. While they are ashing, you still have
time to alter them.
 Turn the right rotary knob to the required setting.
On the display, the “bean symbol” (aroma/strength) ashes rst,
followed by the “ml symbol” (rst for the amount of milk, then for the
amount of froth and lastly for the amount of coee). You are still able
to alter these parameters, while they are ashing.
 If you wish to stop preparation of your drink, press the right
rotary knob.
The “Brewing aborted” message then appears on the display.
4.5 Preparing warm milk
The standard factory setting for warm milk is 150 ml. “150 ml” will be
shown on your display.
The special frothing device allows you to directly transfer milk to your
cup or glass from any type of milk container.
 Connect the hose to the height-adjustable spout (Fig 7).
 Put the other end of the hose into your milk container (see milk
container in Fig 8).
WARNING! Once dry, milk residue can be dicult to remove.
Please clean your equipment thoroughly immediately after it has
cooled down. Always follow the instructions given in the “Rinse
frother” menu item on your display.
4. PREPARING SPECIALITY COFFEES
i
i
!