Sprada TX5 - 6 System Messages

43
MESSAGE MEANING ACTION
FILL SYSTEM Fill water circuit  Press right rotary knob
Possible lter malfunction  Remove or change lter
FILL WATER Water tank empty  Fill water tank
Water tank absent or not properly
installed
 Install water tank correctly (see
point 2.3)
FILL BEANS Beans absent  Fill bean container
Beans stuck in holder  Stir beans in bean container
with a spoon
Note: The message “FILL BEANS” only disappears from the display after the machine has
started preparing coee again.
EMPTY TRAYS Drip tray and/or used coee
tray full
 Empty Drip and /or used coee
tray
TRAYS MISSING Drip and used coee trays absent
or not properly installed
 Install drip and used coee
trays
PLEASE CLEAN System cleaning required  Clean system (see point 5.4)
PLEASE DESCALE System descaling required  Descale system (see point 5.5)
CHANGE FILTER Filter has worn out  Change Filter (see point 5.8)
BREWING UNIT
MISSING
Brewing unit not properly installed  Install and lock brewing unit
correctly (see point 5.7)
6. SYSTEM MESSAGES
6. SYSTEM MESSAGES