Sprada TX5 - Descaling the system

39
5.5 Descaling the system
When the machine needs descaling, the “Please descale” message
will appear on the display. You can, however, start the descaling
programme manually at any time.
WARNING! Please follow the descaling instructions precisely and
in the order they are given! You may continue to obtain drinks
from your machine. We recommend, however, that you start the
descaling programme as soon as possible. Failure to descale
your machine may exempt any claims under warranty.
WARNING! Once activated, the descaling programme must
not be interrupted. Only use proprietary solvents specially
recommended for use in coffee machines. Do not attempt to use
vinegar or any vinegar-based descaling agents.
WARNING! The filter must be removed from the water container
prior to starting the descaling programme.
 Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
 Turn the right rotary knob to “Care”. Now press the right rotary
knob.
 Turn the right rotary knob to “Care Descale”. Now press the right
rotary knob.
The “Empty trays” message will appear on the display.
 Remove the drip and used coee trays (Figs 1/L and 1/M) and
empty them.
 Replace the drip and used coee trays.
The “Remove tank” message will appear on the display.
 Remove the water container and carefully take out the lter
using the tool on the end of the measuring spoon (Fig 4).
 Rell the water container to the 0.5 litre marker with fresh water.
 Add the descaling agent and replace the water container.
WARNING! Always fill the tank with water BEFORE adding the
descaling agent. Never pour the descaling agent into an empty
tank. Read the manufacturer’s instructions.
The messages “Hose to spout” and “and into drip tray” will show
alternately on your display.
 Connect the hose to the height-adjustable spout (Fig 7).
 Put the free end of the hose into the hole at the back of the drip
tray on the right (Fig 10).
 Press the right rotary knob to conrm.
The message “Descaling activated” appears on the display.
 Press the right rotary knob to conrm.
The machine will now begin the descaling cycle.
5.CARE AND MAINTENANCE
!
!
!
!