15
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting ECO-Mode”. Now press
the right rotary knob.
The machine’s current ECO-Mode trigger time setting appears on the
display.
Now press the right rotary knob.
The machine’s current trigger time setting will flash intermittently on
the display screen.
Turn the right rotary knob to select the required trigger time.
Now press the right rotary knob.
Turn the right rotary knob to “ECO-Mode Exit”. Now press the
right rotary knob.
The “Setting ECO-Mode” message will appear on the display.
Turn the right rotary knob to “Setting Exit”. Now press the right
rotary knob.
The first menu level will appear on the display. The machine is now
ready for use.
Note: If the machine is operating in ECO-Mode, “ECO” appears
on the display.
If the machine is operating in ECO-Mode, press the right rotary
knob to return it to full-power operation. This will trigger the
heating cycle and the machine will again be ready for use.
3.7 Setting Automatic Shut O (ASO)
This function allows you to set the period after which the machine will
automatically switch o, if not in use. The factory ASO Mode setting
is “after 5 minutes”.
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting ASO Mode”. Now press the
right rotary knob.
The current ASO Mode setting will appear on the display.
Now press the right rotary knob.
The current ASO Mode setting will ash intermittently on the display
screen.
Turn the right rotary knob to select the required ASO time. Now
press the right rotary knob.
Turn the right rotary knob to “ASO Mode Exit”. Now press the
right rotary knob.
The “Setting ASO Mode” message will appear on the display.
Turn the right rotary knob to “Setting Exit”. Now press the right
rotary knob.
The rst menu level will appear on the display. The machine is now
ready for use.
i
3. SELECTING/ALTERING BASIC SETTINGS
To Next Page
Loading...
