Sprada TX5 - Calling up Operating Statistics; Resetting to Factory Settings

16
3.8 Calling up operating statistics
The “Statistic” menu item records how often the following drinks and
operating functions have been selected since the machine was used
for the rst time:
“Espresso“, “Coee”, “Cappuccino”, “Latte Macchiato”, “Milk”,
“Rinse”, “Clean”, “Descale” and “Filter”.
 Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
 Turn the right rotary knob to “Setting Statistic”. Now press the
right rotary knob.
The “Espresso” message appears on the display, together with
a number indicating the number of times an Espresso has been
prepared.
 Turning the right rotary knob allows you to step through the list
of drinks and machine functions and read o the relevant values.
To get out of the “Statistic” menu, proceed as follows:
 Turn the right rotary knob to “Statistic Exit”. Now press the right
rotary knob.
The “Setting Statistic” message will appear on the display.
 Turn the right rotary knob to “Setting Exit”. Now press the right
rotary knob.
The rst menu level will appear on the display. The machine is now
ready for use.
3.9 Resetting to factory settings
To return the machine to its factory settings, proceed as follows:
 Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
 Turn the right rotary knob to “Setting Reset”. Now press the right
rotary knob.
The factory settings have now been restored. Your machine will switch
o automatically.
Note: After resetting to factory settings, your preferred language
will have to be reset (see point 3.4).
3. SELECTING/ALTERING BASIC SETTINGS
i