31
Turn the right rotary knob to “Recipe Milk”. Now press the right
rotary knob.
Selecting the amount of milk
Turn the right rotary knob to “Milk”. Now press the right rotary
knob.
Turn the right rotary knob to the amount required (between 20
and 240 ml). Press the right rotary knob to conrm your setting.
Important note: Check the size of your cups or glasses.
Selecting the amount of froth
Turn the right rotary knob to “Foam”. Now press the right rotary
knob.
Turn the right rotary knob to the amount required (between 0
and 240 ml). Press the right rotary knob to conrm your setting.
Important note: Check the size of your cups or glasses.
In order to exit a menu, turn the right rotary knob to “Exit”. Now
press the right rotary knob.
Repeating the process returns you to the rst menu level (only
one row of the menu is shown on the display).
Note: If no menu alterations are made, the machine will eventually
return you automatically to the rst menu level.
4.5.2 Preparing warm milk to individual taste
Your machine allows you to prepare warm milk to your individual
taste, independent of the standard settings in the “Setting Recipe”
menu.
In the main menu, turn the right rotary knob to “Milk”.
Turn the left rotary knob to alter the amount of your hot milk (in
ml). When altering the amount of hot milk, the proportion of milk
to froth remains unchanged.
Note: Your machine cannot be programmed to prepare more
than one cup or glass of any drink containing milk.
Place your cup or glass centrally under the spout (Fig 5).
Begin the preparation process by pressing the right rotary knob.
Note: If you began preparation too early, or have made a selection
error, you can still change some of the parameters while your
drink is being prepared. These parameters are shown on the
bottom row of the display. While they are ashing, you still have
time to alter them.
i
i
i
i
i
4. PREPARING SPECIALITY COFFEES
To Next Page
Loading...
