Stack ST500 User Manual

Introduction ST500 Tach-Timer
© Stack Limited
6
for advice if you are in any doubt.
• Route all wires and the wiring harness so they do not snag against
any moving parts of the vehicle.
• Do not apply sharp bends or other severe stresses to the wiring
harness.
• Avoid positioning the sensors or their wires close to any sources of
intense heat or vibration or close to the leads of the ignition HT or
fuel injection systems.
• Use cable clips to secure the wiring harness.
• Use suitable glands or grommets to protect the wiring harness where
it passes through vehicle bulkheads or panels.
Unpacking and Inspection
When you unpack your ST500 Tach–Timer, check all the items against
the packing list.

Stack ST500 Specifications

General

Brand	Stack
Model	ST500
Category	Measuring Instruments
Language	English