Chapter 3. Operating the Display System STACK ST8100 Display System
8 Users Guide
• Oil Pressure (OIL P)
Note: The fuel pressure is displayed as 0.1 PSI (US and UK) and as 0.01 Bar
(EU) on the Low Fuel Pressure version of the display system.
Press Switch 3 to change display to layer 3
Display Layer 3Display Layer 3
Display layer 3 shows:
• Lap number (LAP No) of last completed lap
• Lap time for last completed lap
• Current Speed (SPEED)
• Fastest lap time (BEST) (only the seconds and milliseconds parts of
the lap time are shown)
Press Switch 3 to display layer 4.
Display Layer 4Display Layer 4
Display layer 4 shows:
Top Row
• Best lap time
• Running time from start of lap
• Relative time of this lap to a previously selected lap (this feature is
active only if the Performance Meter has been purchased).
• Bottom Row
• A graphical comparison of this lap to a previously selected lap (this
feature is active only if the Performance Meter has been purchased).
To Next Page
Loading...