Star Micronics TUP500 series - 14.2. MSW1

TUP500 Series Product Specifications
14-3
14.2. MSW1
Bit Function OFF/”0” ON/”1” Emulation Note
SL SP EP
F
E
D
C
B
A Set top margin (See table below) ○ ○ ○ *3
9 Set top margin (See table below) ○ ○ ○ *3
8 Black Mark Function Invalid Valid ○ ○ ○
7 Font Types (Font-A, Font-B) Standard Fonts Large Fonts × × ○ *2
6 Font Types (Font-A, Font-B) Standard Fonts Large Fonts ○ × × *2
5
4 Zero Style Normal Zero Slashed Zero ○ ○ ×
3 International Characters (See table below) ○ ○ × *1
2 International Characters (See table below) ○ ○ × *1
1 International Characters (See table below) ○ ○ × *1
0 International Characters (See table below) ○ ○ × *1
*1) International Characters
n MSW1-3 MSW1-2 MSW1-1 MSW1-0 International Characters
“0” 0 0 0 0 USA
“1” 0 0 0 1 France
“2” 0 0 1 0 Germany
“3” 0 0 1 1 UK
“4” 0 1 0 0 Denmark 1
“5” 0 1 0 1 Sweden
“6” 0 1 1 0 Italy
“7” 0 1 1 1 Spain 1
“8” 1 0 0 0 Japan
“9” 1 0 0 1 Norway
“A” 1 0 1 0 Denmark 2
“B” 1 0 1 1 Spain 2
“C” 1 1 0 0 Latin America
“D” 1 1 0 1 Korea
“E” 1 1 1 0 Ireland
“F” 1 1 1 1 Legal
When Star Line Mode
• This setting is disabled when the printer is installed with Japanese language characters and is set to DBCS.
International character setting is fixed to “Japan (n = 8).”
• This setting is disabled when the printer is installed with Hangul (Korean) language characters and is set to DBCS.
International character setting is fixed to “Korea (n = 13).”
When Star Page Mode
• Enabled when n = “0” to “D.” (“E” to “F” are invalid, so the default setting is selected.
• When the printer is installed with Japanese language characters and is set to DBCS, the international character
setting is fixed to “Japan (n = 8) as default.
• When installed with Hangul (Korean) characters, the international character setting is fixed to “Korea (n = 13)” as
default.
*2) Font Types (Font-A, Font-B)
Large font settings can be made independently in Star Line mode and ESC/POS mode.