Helios Users Guide
www.starcomgpsglobal.com 34
2. Using a Simulator
Connect the Simulator to the computer by using the USB to Mini USB cable.
Connect the Helios unit to the Simulator. Connect the Simulator power supply
and plug it into an electrical outlet. Turn the Simulator on.
Install the Simulator driver on your computer. The Simulator driver can be
downloaded from the following link:
https://trello.com/c/rrMjBtgZ/2-helios-simulator-drivers-win7-exe
For connecting Helios TT and Helios Basic to the Simulator, see pages 77 and
85 (Chapter 6 – Installation).
To Next Page
Loading...
