Helios Users Guide
www.starcomgpsglobal.com 48
Gradual Stop Method – the unit can be used to bring the vehicle to a gradual
stop, if necessary. For example, if the vehicle is reported as stolen, the control
center can issue a Gradual Stop command. Here you can configure the method
to use when a gradual stop command is sent to the unit. The Gradual Stop can
be performed in Pulses – gradually, which is preferable, or Constantly –
abruptly.
ON Constantly / ON Pulses – select, if you’re using a Normally Closed relay.
OFF Constantly / OFF Pulses – select, if you’re using a Normally Open relay.
For more information, see Appendix D – Immobilizer and Gradual Stop.
To Next Page
Loading...
