Helios Users Guide
www.starcomgpsglobal.com 52
Use the Remote Control small button as an Emergency – if activated, the
remote control small button will be used as an emergency button.
Transmit when new driver is detected – each time a new driver is detected
(using keypad, remote control, or iButton) a message will be transmitted.
The following settings correspond to the unit Analog Inputs 1 and 2.
0 – 15 V – the device will measure 0 to 15 V on analog input with an accuracy
of 15 mV.
0 – 27.5 V – the device will measure 0 to 27.5 V on analog input with an
accuracy of 25 mV.
Fuel Input – the input that will be used for fuel measurement. For more
information, see Appendix F – Fuel Management.
To Next Page
Loading...
