Starcom Systems Helios - Page 84

Helios Users Guide
www.starcomgpsglobal.com 84
10
Speaker (+) / or
Extra Analog Input
3 (-)
Violet
Audio
Hands Free Kit
connector. In case
HFK is not
connected, you can
cut the connector
and use pin 10 as
Extra Analog Input
3
11
Analog 1
Yellow/Blue
Input (+)
Usually used for
fuel or temperature
measurement
12
CAN High
Black/Gray
CAN Bus
connection
CAN +
13
Door Lock
Gray/Orange
Output (-)
Install with an
external relay. See
Appendix C –
Central Locking
System
Configuration
14
Arm
Orange/White
Input (-)
15
RS232 RX
Blue/Black
Communication
RS232 wire set with
Molex connector
16
Door
Green
Input (-)
* The odometer input informs the system whether to measure mileage by
counting odometer pulses or by calculating the distance traversed by the
vehicle using GPS. The odometer can count pulses from any type of pulse
generator.