Helios Users Guide
www.starcomgpsglobal.com 98
Besides entering the user information, you can select the following
options:
Show all my units on the map –all the user’s units will be displayed on
the Map page. If this option is disabled, only the selected unit will be
displayed.
Show coordinates in reports – the user’s reports will include the GPS
coordinates.
Service: Private / Commercial / Advanced – defines the level of user
access for the Plans and the Reports sections.
Report Access – allows to select which reports will be accessible for the
user.
Google Maps access – enables Google Maps access on the Maps page.
Profile section access – enables the user to view his Profile section.
Editing units – enables the user to edit the unit details.
Allow status requests – enables the user to make unit status requests.
Allow outgoing commands – enables the user to send commands to the
unit.
Allow stopping vehicle – enables the user to send a command to the
unit which will stop the vehicle.
Allow logic state changing – enables the user to change the unit logic
state.
Allow clearing fleet – enables the user to send Clear Fleet command to
the units.
Wiring table access – allows access to the Wiring tab in the Help
section.
Cellular Commands – enables the user to send commands to the unit
from a cellular phone.
Cellular Notification – enables the user to receive cellular notifications.
Monitoring – enables the user to view the Monitoring page.
Lock account after 5 bad login attempts – locks access to Starcom
Online account after the user has made 5 bad login attempts.
To Next Page
Loading...
