STERO SG - TOGGLE DIAGNOSTIC; PRIME PUMPS

TOGGLE DIAGNOSTIC
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer:
Stero Cold SG)
Hot Units
(Stero Hot SU-H)
Description Possible Values Default Values
Toggle Diag
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
Toggle on-
screen
diagnostics.
Toggle Diag: (off)
Toggle Diag: (on)
Toggle Diag: (off)
PRIME PUMPS
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer:
Stero Cold SG)
Hot Units
(Stero Hot SU-H)
Description Possible Values
Pump Menu
Stero Cold SU-L
Stero Cold SG
Manual prime for
sanitizer pump.
If chemical
sensor value is
below set
threshold value,
priming stops.
Pump Menu
Sanitizer
NOTE: Default
setting shown
in bold.
1100mV
Range: 70 to 2900
mV
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
Manual prime for
detergent pump.
If chemical
sensor value is
below set
threshold value,
priming stops.
Detergent
NOTE: Default
setting shown
in bold.
1100mV
Range: 70 to 2900
mV
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
Manual prime for
rinse aid pump.
If chemical
sensor value is
below set
threshold value,
priming stops.
Rinse Aid
NOTE: Default
setting shown
in bold.
2500mV
Range: 70 to 2900
mV
SG, SU-L, SU-H DISHWASHERS - SERVICE PROCEDURES AND ADJUSTMENTS
Page 23 of 59 F45577 (1215)