STERO SG - MANAGER PROGRAMMING (1001); EDIT PARAMETERS

EXIT MENU
Parameter
Name
Cold Units
(Stero SU-L)
(Stero Glass Washer SG)
Hot Units
(Stero SU-H)
Description
Exit Menu
Stero SU-L
Stero SG
Stero SU-H Exits menu.
MANAGER PROGRAMMING (1001)
Service Programming
•
EDIT PARAMETERS
•
PRIME PUMPS
• EXIT MENU
1. Press MENU button on keypad.
2. Enter SERVICE MENU.
3. Enter Service code 1001.
EDIT PARAMETERS
Parameter
Name
Cold Units
(Stero SU-L)
(Glass Unit:
Stero SG)
Hot Units
(Stero SU-H)
Description
Possible
Values
Default
Values
Detergent
Pump
Stero SU-L
Stero SG
Stero SU-H Detergent pump operation.
Disabled /
Enabled
Enabled
Rinse Aid
Pump
Stero SU-L
Stero SG
Stero SU-H Rinse Aid pump operation.
Disabled /
Enabled
Enabled
SG, SU-L, SU-H DISHWASHERS - SERVICE PROCEDURES AND ADJUSTMENTS
Page 27 of 59 F45577 (1215)