STERO SG - IMMEDIATE SHUTDOWN; SHOW SOFTWARE REV.; RESET PARAMETERS; EXIT MENU

IMMEDIATE SHUTDOWN
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer: Stero Cold
SG)
Hot Units
(Stero Hot SU-H)
Description
Immediate
Shutdown
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
When selected, shuts
dishwasher down immediately
even if in the middle of an
operation. Machine will not
drain and will not purge existing
water at next start up. This
function is to save fill and drain
time when servicing.
SHOW SOFTWARE REV.
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer: Stero Cold
SG)
Hot Units
(Stero Hot SU-H)
Description
Show Software
Rev
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
Will display machine type and
software revision.
Example: Version 2.01
RESET PARAMETERS
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer:
Stero Cold SG)
Hot Units
(Stero Hot SU-H)
Description Possible Values Default Value
Reset
Parameters
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H
Resets all
parameters to factory
default settings.
Yes
No
No
EXIT MENU
Parameter
Name
Cold Units
(Stero Cold SU-L)
(Glass Washer: Stero Cold
SG)
Hot Units
(Stero Hot SU-H)
Description
Exit Menu
Stero Cold SU-L
Stero Cold SG
Stero Hot SU-H Exits menu.
SG, SU-L, SU-H DISHWASHERS - SERVICE PROCEDURES AND ADJUSTMENTS
F45577 (1215) Page 24 of 59