BR 80032
11.1 Tools, Servicing Aids
– Socket, T27x125 – 0812 542 2104 or equivalent
– Torque wrench – 5910 890 0302 or equivalent
– Screwdriver, T27x200 – 5910 890 2415 or equivalent
– Punch-down tool – 5910 890 4000 or equivalent
– Pipe wrench
– STIHL OH 723 press fluid – 0781 957 9000
11.2 Removing the Antivibration Elements
N Preparations, @ 3.1.
N Remove the tank housing, @ 10.5.
N Remove the backplate, @ 10.9.
N Unscrew bearing plugs (1) with springs (2)
counterclockwise from their mounts.
N If the bearing plugs and springs cannot be unscrewed
by hand: Use a pipe wrench.
N Unscrew bearing plugs (1) counterclockwise from the
springs (2).
N Unscrew bearing plug (4) with spring (5)
counterclockwise from bearing plug (6).
N Unscrew bearing plug (4) counterclockwise from the
spring (5).
N Take out the screw (3).
N Remove the bearing plug (6).
11.3 Installing the Antivibration Elements
N Fit the bearing plug (6).
N Insert and tighten down the screw (3).
N Screw the spring (5) clockwise onto the bearing plug
(6) as far as stop.
N Screw the bearing plug (4) clockwise onto the
spring (5) as far as stop.
N If the springs and bearing plugs cannot be fitted by
hand: Coat guides in bearing plugs with press fluid.
N Screw the springs (2) clockwise onto their mounts as
far as stop.
N Screw the bearing plug (1) clockwise onto the
springs (2) as far as stop.
N Install the backplate, @ 10.12.
N Install the tank housing, @ 10.6.
11.4 Removing the Stop Buffer
N Preparations, @ 3.1.
N Remove the tank housing, @ 10.5.
N Remove the backplate, @ 10.9.
N Use punch-down tool 5910 890 4000 to pry out the
stop buffer (7).
11 Antivibration Elements
1
2
3 P6x25 (6 Nm / 53 lbf. in.)
7
6
5
4
0000-GXX-6623-A0
To Next Page
Loading...
