BR 800 49
N Apply bead of sealant to cover (2) (a = 2 - 3 mm (0.08
- 0.12 in)).
N Fit the cover (2) in position.
N Insert and tighten down the screws (1).
N If the inner blower housing has been removed: Install
inner blower housing, @ 17.7.
N Install the blower wheel, @ 17.8.
N Install outer blower housing, @ 17.9.
N Adjust valve clearance, @ 12.2.
N Install the cover, @ 7.5.
a
8016RT008 AS
To Next Page
Loading...
