BR 800 57
Flat nose side cutting pliers Removing blade receptacles; removing, installing
valve gear
Needle Assembling spark plug boot
Scriber Disassembling the carburetor
Soft-faced hammer Removing the flywheel
Screwdriver, PH1x80 mm Removing, installing carburetor
Safety glasses
Protective gloves
Pin punch, 6 mm Assembling the Carburetor
Pipe wrench Removing, installing antivibration elements
0781 120 1110 STIHL multipurpose grease Lubricating starter mechanism; lubricating lips of
oil seals; installing control handle
0781 417 1315 STIHL special lubricant Installing the rewind spring
0781 957 9000 STIHL OH 723 press fluid Installing rubber components; installing manifold
0783 830 2000 Silicone sealant, HT red Installing valve gear; installing engine pan
0786 111 2101 Loctite 242 (medium-strength threadlocking
adhesive)
Assembling the carburetor
0786 111 2109 Loctite 270 (high-strength threadlocking
adhesive)
Installing the Collar Screws
Two-stroke engine oil Installing valve gear; installing piston
Solvent-based degreasant containing no chlorin-
ated or halogenated hydrocarbons
* full part number is country-specific
Part No. Part Name Application
To Next Page
Loading...
