0458-725-8621-B
46
English
21 Cleaning
WARNING
To reduce the risk of unintended activation, never store the
trimmer with the connecting cord inserted. Always remove
the connecting cord before storing.
When storing the trimmer / brushcutter:
► Remove, clean and inspect the cutting attachment. Coat
metal cutting attachments with corrosion inhibitor.
► Clean the trimmer / brushcutter, @ 21.
► Store the trimmer / brushcutter indoors in a dry and secure
location, out of the reach of children and other
unauthorized persons.
21.1 Cleaning the Power Tool
WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before carrying out
any cleaning work, @ 6.1. Users of this trimmer should
carry out only the cleaning described in this manual.
To clean the trimmer / brushcutter:
► Clean plastic components with a slightly dampened cloth.
Do not use detergents or solvents. They may damage the
polymer components.
► Do not use a pressure washer to clean the unit or spray it
with water or other liquids.
► Keep the socket free from foreign matter and clean as
necessary with a soft brush or soft, dry cloth.
NOTICE
Never spray the power tool with water. Spraying it with a
stream of water could result in damage to the electronics
and other systems.
21.2 Clean the Contact Surfaces of the Connecting
Cord
► Remove the Connecting Cord, @ 14.2.
► Clean the contact surfaces(1) with a dry cloth.
► If a dis-coloration(arrow) is still visible on the contact
surfaces: Sand down the dis-coloration with a fine P600
sand paper until the contact surfaces shine again.
21 Cleaning
0000-GXX-6245-A0
To Next Page
Loading...
